Tipsy Android 6.0 Marshmallow rom on Gionee P4 and Walton GH2

÷ Prerequisites:
•This Android 6.0.1 Tipsy Os is meant for only Gionee P4 and Walton Gh2. Please do not try on any other device.
•Your phone should have a custom recovery installed in order to install this Rom on your phone. TWRP 3.0.2 or Philz Recovery  [     TWRP RECOVERY     or   Philz RECOVERY LINK
•We will be using TWRP Recovery for flashing this Rom
•This Rom will wipe out all your data. Make sure you backup all your data in your phone before proceeding.
•Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.
•Don’t worry we are going to share step by step guide to safely

 

*Disclaimer:
This site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

Follow our guide below to download the Rom and install it yourself.


How to Flash This Tipsy Android 6.0.1 Marshmallow Rom On Your Gionee P4

Step 1 –Download the  Tipsy OS 6.0.1 Marshmallow Rom and Google Apps for your device to your computer or device

Step 2 – Connect and mount your device USB memory on your computer using the USB cable.

Step 3 – Now copy/paste the downloaded Android 6.0.1 ROM zip file and Google Apps.zip files to your SD card. Make sure the files are in the SD card root (not in any folder).

Step 4 – Then turn OFF your phone and disconnect from the USB cable.

Step 5 – Now boot in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together


Step 6 – Once you are in Recovery Mode, select perform a full data wipe by selecting “wipe data/factory reset”. Use the Power button to select everything while in the Recovery Mode.

Step 7 – Then, perform a cache wipe by selecting “wipe cache partition” .

Step 8 – Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From Twrp recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

Step 9 – Then go back to the main recovery screen and select “install zip from SD card”.

Step 10 – Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 6.0.1 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Google Apps: Repeat the above step for the Gapps zip file as well and install it on your phone.

Step 11 – After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu.


Your Device will boot now and it might take about 5 minutes to boot on your first time. So, please wait. Your Android phone should now have TipsyOS Android 6.0.1 Marshmallow latest build installed on It! Go to Settings &  About phone to verify.

Flash the Sd patch and Sensor patch after booting up the Phone


Credit
Farhan Tanzim
Nana Iyke
Ajit

Download

Tipsy OS Marshmallow rom for Gionee P4 and Walton Gh2

SD PATCH

GApps

SensorPatch




Source :   AndroidVilla